Item # CC4030
CC4030 Core & Coil Neon Transformer
4,000V · 30mA
- In stock · ships from Phoenix
$59.95
- 1+ $59.95 ea.
- 25+ $57.95 ea.
- 96+ $55.95 ea.
Need help matching a part? Call (480) 820-9517. We know the catalog.
Specifications
- Input Voltage
- 120vts / 60hz / 1.1 Amps
- Output Voltage
- 4,000vts / 30mA
- HV Output Leads
- 17" Silicone
- 120vt Input Leads
- 17"
- Unit Weight
- 5 lbs.
- Case Size
- 6 units.
- Case Weight
- 30 lbs.
- Manufactured
- Imported
- Warranty
- 1 Year for neon applications. Any other use voids the warranty
How much tube will it light?
The most tubing, in feet, this transformer will light, by tube diameter.
| Tube size | Neon | Argon |
|---|---|---|
| 15mm | 13 ft | 16 ft |
| 13mm | 11 ft | 13 ft |
| 12mm | 10 ft | 12 ft |
| 10mm | 8 ft | 9 ft |
- Neon
- for the reds, oranges and pinks.
- Argon
- for blues, greens, whites and most other coated colors (argon with a drop of mercury).
- Electrodes
- add 1 ft for each pair of electrodes when you add up your tubing.
Not sure which transformer you need? Use the Footage Calculator
About this product
CC4030 - 4,000V 30ma Core and Coil Neon Transformer
This 4,000V 30mA core-and-coil transformer is compact, reliable, and ideal for neon signage, neon clocks and art projects among others. This model deliver's “advertising bright” 30mA output. It's perfect for indoor or protected installations. Properly loaded, this model can last for decades. Make note... Underloading the CC4030 with too little tubing can cause overheating and early failure, so always make sure it is loaded properly. Need help, give us a call and we can guide you to the proper core and coil for your project. Available and in stock now!
Power cord sold separately: Power Cordset for Core and Coil Transformers (8 ft, thumb switch)
Good to know
Note: This model does NOT like to be "underloaded".
Add 1 ft. for each pair of electrodes when calculating the load.
NOTE: This neon transformer has two high-voltage output wires, RED and BLACK. When used with neon tubes, it doesn’t matter which wire connects to each electrode because the output is floating. However, for other applications (such as ozone generators or grounding setups), the RED wire should be treated as the hot (higher potential) lead. For safety, always assume both wires carry dangerous high voltage and handle with care.
Resource Center
