NEON BENDING SUPPLIES

SILICONE-CORK-KIT.jpg

   STOCKED!

HIGH TEMP SILICONE CORK KIT

Premium-grade high-temp silicone corks used to seal the ends of unused glass tubing during the bending process.

  • High-Temp Silicone - heat resistant up to 600 degrees.

  • Convenient and organized to keep at your bending table.

  • Color-coded for easy recognition.

  • Use over and over!

  • Kit Includes corks for: 6, 8, 9, 10, 12, 13 and 15mm.

$29.95 ea.
NEON-TUBE-BENDING-CORKS.jpg

Item #: S-CORK-KIT

BEST-SELLER-2.jpg

   STOCKED!

NATURAL-CORK-KIT.jpg

   STOCKED!

NATURAL CORK KIT

Premium all natural corks used to seal the ends of unused glass tubing during the bending process.

Each kit includes:

  • A generous assortment of 8mm, 9mm, 10mm, 11mm, 12mm, 13mm and 15mm natural corks.

  • Convenient work table case.

  • When one size gets low, reorder more individual corks to refill.

$29.95 ea.

Item #: N-CORK-KIT

Premium all-natural corks used to seal the ends of unused glass tubing during the bending process.

NATURAL-CORK-CHART.jpg
8mm  9mm
10mm
11mm  12mm
50+
100+
1000+
 .20c ea.
.17c ea.
.15c ea.
13mm  15mm
16mm
50+
100+
1000+
 .22c ea.
.19c ea.
.17c ea.
18mm
50+
100+
1000+
 .24c ea.
.21c ea.
.19c ea.
50-count minimum of same size
NATURAL CORKS

   STOCKED!

MADE-IN-THE-USA-SAYING.jpg
NEON-SWIVELS.jpg

   STOCKED!

BRASS SWIVELS

Swivels are used to connect the blow hose to stoppers to allow the hosing to be freely rotated without kinking. 

 

3/16” and 1/4" size Swivels are most commonly used for bending neon tubing.

3/16"  90 Degree Brass Swivel

$14.95 ea.

Item #: SWIVEL-3/16"

1/4"   90 Degree Brass Swivel

$16.95 ea.

Item #: SWIVEL-1/4"

SPECIAL 2-PACK OFFER  (save $4)

* No substitutions or changes.
* Must be one of each size.

One each: 1/4" and 3/16" Brass Swivel

Item #: SWIVEL-PACK

$28.95 ea.
SWIVEL-BLOW-HOSE.jpg

   STOCKED!

PREMIUM LATEX BLOW HOSE
By-The-Foot

STYLE 1  *for 3/16" Swivel

1/8" ID, 1/4" OD  

Item #: BLOW-1/8

STYLE 2  *for 1/4" Swivel

3/16" ID, 5/16" OD  

Item #: BLOW-3/16

$1.99 per foot
AMBER-MOUTH-PIECE.jpg

   STOCKED!

AMBER BLOWING MOUTH PIECE

High quality, lightweight and cost effective. Known as the "teeth saver" since it is more forgiving to teeth than a glass mouth piece. Super comfortable!

  • Fit's both sizes of blow hose we sell.

$1.99 ea.

Item #: AMBER-MP

BHAK-BLOW-HOSE-ADAPTER-KIT.jpg

   STOCKED!

BEST-SELLER-2.jpg
BLOW HOSE ADAPER KIT

Our Neon Blow Hose Adapter kit contains two soft plastic and one tapered soft rubber connector adapters.

The Rubber Blow Hose Adapter Kit - 3 Pack comes with 3 different adapters designed to help attached your blow hose to your blow tube. This kit works best with a 1/4" swivel.

This kit includes:

 

1 inside adapter to go inside of a tube with approximately an 8mm inside diameter

 

2 outside adapters - 1 to fit over tubes 13mm or less and 1 to fit over tubes 16mm or less.

 

With this convenient kit, attaching your blow hose to your blow tube has never been easier! 

$14.95 ea.

Item #: BHAK

SWIVEL-CONES.jpg
ASSORTTED SWIVEL BENDING CONES

We stock three different swivel cones.

Choose from:

  • Natural rubber

  • Soft rubber

  • High-temp silicone.

TRA-TAPERED-RUBBER-ADAPTERS.jpg

   STOCKED!

1.  TAPERED RUBBER ADAPTER PAIR

Economy-minded 2-pack.

  • Rubber.

  • Fits swivels:  3/16" thru 1/4"

  • Cone Inside:  11mm thru 15mm

  • Made in the USA.

MADE-IN-THE-USA-SAYING.jpg

Top: 1/2" (12.7mm)

Bottom: 5/16" (8.2mm)

Length: 13/16" (21mm)

$4.95 2-Pack

Item #: TRA

SWIVEL-RED-TRC.jpg

   STOCKED!

2.  TAPERED SOFT-RUBBER SWIVEL CONNECTOR

Old-Timers favorite!

  • Hand-spun soft rubber.

  • Fits swivels:  3/16" thru 1/4"

  • Cone Inside:  10mm thru 15mm

  • Made in the USA.

MADE-IN-THE-USA-SAYING.jpg

Top: 1/2" (12.7mm)

Bottom: 5/16" (8.2mm)

Length: 13/16" (21mm)

$9.95 ea.

Item #: RED-TRC

SWIVEL-HT-CONE.jpg

   STOCKED!

3.  HIGH-TEMP SILICONE

Modern updated bending cone

made of high-temp silicone.

NEW-VERSION-2.0.jpg
  • Premium high-temp Silicone.

  • Fits swivels:  3/16" thru 1/4"

  • Cone Inside:  10mm thru 18mm

Top: 5/8"  (15.87mm)

Bottom: 7/32"  (5.55mm)

Length: 2"  (50.8mm)

BEST-SELLER-2.jpg
$11.95 ea.

Item #: HT-CONE

BRASS-ELECTRODE-HOLDER.jpg

   STOCKED!

ELECTRODE HOLDERS

These quality brass holders are used to keep fingers cool while splicing on an electrode. Available in 10mm, 12mm and 15mm, each Neon Electrode Holder easily and securely grasps the electrode.

  • Comfortable insulating grip tip.

  • Super easy to use, holds electrode firmly.

$29.95 ea.

Item #'s:   EH-10    EH-12    EH-15

MADE-IN-THE-USA-SAYING.jpg
NBHB-NEON-BENDING-BLOCK.jpg

   STOCKED!

BENDING BLOCK

A must on every tube benders table! Helps manipulate the molten tube into shape.

  • Contains no asbestos. 

  • Each is made from a combination of fiber and calcium silicate. 

  • Withstands temperatures up to an incredible 1400 degrees F.

  • Will leave no markings on neon tubing.

  • Commercial grade to last for years.

  • Dimensions: 7 1/2" x 3" x 1" thick.

$22.95 ea.

Item #: NBHB

MADE-IN-THE-USA-SAYING.jpg
AAA-NEON-BENDING-SCREEN-1.jpg

   STOCKED!

BENDING SCREEN

Stainless steel, the best material for bending screens with it's superior heat dissipation. If your screen is tattered and crumpled, upgrade today!

  • Superior stainless-steel.

  • Fantastic heat dissipation.

  • Lay over paper or fabric patterns.

  • Precision Laser cut.

  • Generous 24" x 24".

  • Replace old worn out screens.

CUSTOMER-FAV-BLK.jpg
AAA-NEON-BENDING-SCREEN-3.jpg
$43.95 ea.

Item #: SCREEN

MADE-IN-THE-USA-SAYING.jpg
AAA-NEON-BENDING-BAG.jpg

   STOCKED!

AAA-NEON-BEAN-BAG-WEIGHT.jpg
Kevlar
HIGH TEMP NEON BENDING
WEIGHT BAGS

Use the Neon Bending Weight Bags to assist while bending. Each bag helps stabilize the neon tube to minimize tube shifting while bending to a pattern.

  • High-temp Kevlar fabric.

  • Perfect weight size ratio.

1 LB. GOOD!   $19.95 ea.    Item # NB-BAG-1

 

3 LBS. BEST!   $29.95 ea.   Item # NB-BAG-3

MADE-IN-THE-USA-SAYING.jpg
NEON-TUBE-SIZER-1.jpg

   STOCKED!

NEON-SIZER.jpg
NEON TUBE SIZER

Invaluable neon glass sizer. 

Inexpensive "must have tool"

for any tube bender. 

mm Sizes:

 

2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 20, 22, 24, 26, 28, 30, 32, 35, 38 and 40.

BEST-SELLER-2.jpg
$9.95 ea.

Item #: NT-SIZER

MICA-PACK.jpg

   STOCKED!

MICA PACK

Insert mica between tight bends. The electrical voltage used to bombard a tube is powerful enough to blow clean through your work. Mica will add electrical resistance and discourage blow through. Thinner pieces for tight spots and thicker pieces for all else.

  • Generous 3" x 4"

  • Convenient case

  • 10-count;  Five .5mm  &  Five 1mm

$19.95 ea.

Item #: MICA

LEAD-FREE-GLASS-FILES.jpg

   STOCKED!

LEAD-FREE GLASS FILES

Commercial-grade bastard-cut files for lead-free glass. It's no secret, lead-free glass is brutal to files, so finding the best one is crucial. Though no file can indefinitely withstand non-leaded glass use, our files will last longer than your standard file.

  • Commercial grade.

  • Bastard cut.

  • Size; 7.5" L overall, 5" cutting area, 5/8" W, 1/8" Thick

$16.95 ea.

Item #: FILE

BEST-SELLER-2.jpg
MADE-IN-THE-USA-SAYING.jpg
STABILO-NEON-MARKING-PENCIL.jpg

   STOCKED!

NEON BENDING MARKING PENCILS

Stabilo brand pencil's are the neon bending marking pencil of choice with Tube Benders. Each feature non-greasy lead ideal for marking upcoming bends on neon glass. The mark will not disappear with the heat of the fire but can easily be removed with a damp rag. The leads are made from the highest-quality pigments and finest graphite.

  • Black,  White,  Red

$2.49 ea.

Item #'s:  PENCIL-BLK    PENCIL-WHT    PENCIL-RED

MERCURY-BOTTLE.jpg

   STOCKED!

MERCURY

No HazMat Shipping Fee!

  • Commercial grade.

  • Triple Distilled.

  • 99.9995% pure.

  • .9 lb. glass bottle.

  • No HazMat shipping charge.

CUSTOMER-FAV-BLK.jpg
$134.95 ea.

Item #: MERCURY

MADE-IN-THE-USA-SAYING.jpg
MERCURY-INJECTOR-SYRINGE-2.jpg

   STOCKED!

"GLASS" MERCURY INJECTOR

Our commercial-grade Mercury Injector Syringe is made of "Glass" which, unlike a plastic syringe or solvent applicator bottle, our glass syringe will not contaminate the mercury which is vitally crucial for neon tubes.

The Glass Mercury Injector includes a "blunt" dispensing tube end. The blunt tip reduces the danger associated with sharp medical syringes commonly employed to inject mercury.

$49.95 ea.

Item #: MERC-SYRINGE