Phoenix, AZ USA
480-820-9517
800-692-6780
Proudly Serving
the
Neon Industry
Since 1986
One device does it all! Twist to connect… Simple and quick!
Quik-Connects™ provide compliance with NEC Sign Code Sections 300.4, 600.33 & 725.136 to protect HV Neon wiring from physical damage. Versatile smooth-walled feed-thru insulators protect insulated sign wires. Use with all wire types from low voltage LED through high-voltage Neon GTO. Male threading and choice of locknut provides a simple and elegant insulating solution. Each pass-thru is supplied with a standard locknut. Use by itself or easily connect it to Female or Male Locknut together with Non-Metallic Greenfield (NMG) Flexible Quik-Connects™ to accommodate most any interior electric sign installation! Provides unmatched versatility in the field. Requires drilling only a 9/16” hole for installation.
Insulating Bushings
STOCKED!
8" 6" 4" 2"
High Voltage Pass-Thru Hole
Pass-Thru's
All Pass-Thru's include nut.
2" Pass-Thru
-
Each: $4.99 ea. Item # DC-PT2-S
-
Case: $329 100-count ( $3.29 ea.) Item # DC-PT2-C
4" Pass-Thru
-
Each: $6.95 ea. Item # DC-PT4-S
-
Case: $269 50-count ( $5.38 ea.) Item # DC-PT4-C
6" Pass-Thru
-
Each: $7.95 ea. Item # DC-PT6-S
-
Case: $299 50-count ( $5.99 ea.) Item # DC-PT6-C
8" Pass-Thru
-
Each: $8.95 ea. Item # DC-PT8-S
-
Case: $349 50-count ( $6.99 ea.) Item # DC-PT8-C
Call to Order!
All Sales Final. No returns, exchanges or refunds.
PASS-THRU SIZING CHART
Max Panel Thickness (inches)
2" -
4" -
6" -
8" -
1.75"
3.75"
5.75"
7.75"
STOCKED!
Female Locknut
-
Each: $5.49 ea. Item # DC-FLN-S
-
Case: $359 100-count ( $3.59 ea.) Item # DC-FLN-C
Call to Order!
All Sales Final. No returns, exchanges or refunds.
STOCKED!
Male Locknut
-
Each: $8.95 ea. Item # DC-MLN-S
-
Case: $359 50-count ( $7.18 ea.) Item # DC-MLN-C
Call to Order!
All Sales Final. No returns, exchanges or refunds.
STOCKED!
Extra Locknut
-
Each: $4.95 ea. Item # DC-NUT-S
-
Case: $275 100-count ( $2.79 ea.) Item # DC-NUT-C
Call to Order!
All Sales Final. No returns, exchanges or refunds.
Non-Metallic Greenfield
-
Case: $309 100-foot Item # DC-GNF-100
Call to Order!
All Sales Final. No returns, exchanges or refunds.
STOCKED!
Approximate Dimensions: 3/8" ID, 5/8" OD
Insulating Bushings
Example Step-By-Step Installation
In this example, we show a standard 2 x 4 wall with sheetrock on each side. Use these same procedures for any thickness material you want to pass high-voltage wire thru.
#1. Drill a 5/8" to 3/4" hole through the surface you want to run the
high-voltage wire thru.
#2. Choose the right length Pass-Thru for the job. In this case, it would be the 6" model.
REAR SIDE
#3. Install the Pass-Thru through the drilled hole and secure in place with with the nut on the rear side.
FRONT "NEON" SIDE
*Side of the wall the neon will be mounted on
#4. Install a Female Locknut on the rear side of the wall onto the threads of the Pass-Thru and tighten down.
#5. The Female Locknut is now installed.
#6. Cut a length of the Non-Metallic Greenfield to cover a high-voltage run from the wall Pass-Thru to your next connection point.
#7. Simply "twist" the Non-Metallic Greenfield onto the male shaft located on the Female Locknut.
#8. The other end of the Non Metallic Greenfield would either be routed to another piece of neon or a Metal Transformer Box as pictured. If going to a transformer box, a Male Locknut would be used. The Male Locknut would be bolted to a service knockout on the box, which would allow the Non-Metallic Greenfield to twist onto it.
The installation is complete and ready for the high-voltage wire to be run through the installation.
Transformer box
