top of page

12-Volt  Neon Transformers

VT1510-12-BERTONEE-NPS-12D5.jpg

   STOCKED!

Model: VT1510-12 

Ventex Brand
  • Input: 12-Volts DC  *11-14 VDC
  • Amp Draw: 600-900 Amps rms.
  • Output: 0V-1,500-Volts 15mA
  • Constant burn.
  • UL Listed.
  • This model neon transformer has been commonly used in Pinball Maachines.
  • This model was formely formerly known as Bertonee model NPS-12D5.
  • Used in Pinball Machine "Cirqus Voltaire"
  • Used in Pinball Machine "Star Wars Episode 1".
  • Size: 2.2" L, 2.25" w, 1.10" Thick.
  • Imported.
  • One year limited warranty.

1+ $99.95 ea.
10+ $97.95 ea.
50+ $95.95 ea.

Call to Order!

Item # VT1510-12

Transformer Leads
  • High voltage leads: approx. 18" long.

  • 12vt input wires: approx. 8" long.

  NEON Gas:   2-5 feet       
  ARGON Gas:   2-6 feet    

This model Transformer can be powered up by a plug-in wall adapter.

If you would like to use an adapter, choose which adapter will work best for your application.

SCRIPTING-TRANS-ADAPTER.jpg
CPI-DC-45-CPI-DC-65.jpg

   STOCKED!

Model: 12VT-4520

CPI Brand
  • Input: 12-Volts DC
  • Amp Draw: 3
  • Output: 4,500-Volts 20mA
  • Full-range self-adjusting up to it's max load.
  • Completely sealed and waterproof.
  • Suitable for indoor and outdoor installations.
  • Features built-in open circuit protection and thermal protection.
  • Can be installed on either metallic or non metallic surfaces but always provide adequate ventilation. If mounting on a vehicle, it is suggested you not mount the transformer in the engine compartment where it will be exposed to excessive heat from the engine.
  • Imported.
  • One year limited warranty.

Warranty: Limited One (1) Year. In the unlikely event of a warranty issue, said unit must be returned by the Customer, freight prepaid, to either CPI Advanced or WCCD, LLC for warranty consideration. Modifying the unit in any way will void the warranty. This includes, but not limited to, removing the label or opening the unit.

Transformer Leads
  • High voltage leads: approx. 11" long.

  • Black Neg (-) 12vt input wire: approx. 12" long.

  • Red POS (+) 12vt input wire: approx. 8" long.

  • Red wire includes in-line fuse for added safety.

  • White external controller wire: approx. 13" long.

Note: The white input wire is designed for an external controller. CPI does not offer a controller and this function is not supported. On most, if not all installations, the white wire is not connected.

1+ $59.95 ea.
10+ $57.95 ea.
50+ $55.95 ea.

Call to Order!

Item # 12VT-45

  NEON Gas:   15mm - 12'  /  13mm - 11'  /  12mm - 10'  /  11mm - 8'  /  10mm - 7'  /  9mm - 6'  /  8mm - 5'       
  ARGON Gas:   15mm - 14'  /  13mm - 12'  /  12mm - 11'  /  11mm - 9'  /  10mm - 8'  /  9mm - 7'  /  8mm - 6'    
When calculating the length, always add 1ft. for each pair of electrodes.
CPI-DC-45-CPI-DC-65.jpg

   STOCKED!

Warranty: Limited One (1) Year. In the unlikely event of a warranty issue, said unit must be returned by the Customer, freight prepaid, to either CPI Advanced or WCCD, LLC for warranty consideration. Modifying the unit in any way will void the warranty. This includes, but not limited to, removing the label or opening the unit.

Model: 12VT-7520

CPI Brand
  • Input: 12-Volts DC
  • Amp Draw: 5
  • Output: 7,500-Volts 20mA
  • Full-range self-adjusting up to it's max load.
  • Completely sealed and waterproof.
  • Suitable for indoor and outdoor installations.
  • Features built-in open circuit protection and thermal protection.
  • Can be installed on either metallic or non metallic surfaces but always provide adequate ventilation. If mounting on a vehicle, it is suggested you not mount the transformer in the engine compartment where it will be exposed to excessive heat from the engine.
  • Imported.
  • One year limited warranty.
Transformer Leads
  • High voltage leads: approx. 11" long.

  • Black Neg (-) 12vt input wire: approx. 12" long.

  • Red POS (+) 12vt input wire: approx. 8" long.

  • Red wire includes in-line fuse for added safety.

  • White external controller wire: approx. 13" long.

Note: The white input wire is designed for an external controller. CPI does not offer a controller and this function is not supported. On most, if not all installations, the white wire is not connected.

1+ $69.95 ea.
10+ $67.95 ea.
50+ $65.95 ea.

Call to Order!

Item # 12VT-75 

  NEON Gas:   15mm - 19'  /  13mm - 17'  /  12mm - 16'  /  11mm - 13'  /  10mm - 11'  /  9mm - 9'  /  8mm - 8'       
  ARGON Gas:   15mm - 23'  /  13mm - 20'  /  12mm - 18'  /  11mm - 15'  /  10mm - 12'  /  9mm - 11'  /  8mm - 9'  
When calculating the length, always add 1ft. for each pair of electrodes.
*formerly Bertonee NPS-12D5
bottom of page