top of page
SIGNATROL-FLASHER.jpg

   STOCKED!

SIGNATROL-30-01.jpg
SIGNATROL MODEL 30-01 "CHASER "

Signatrol Model 30-01 is a standard duty On-Off flasher units with variable speed controls.

 

This standard unit is furnished with 50% cams, (single notch) so the “ON” and “OFF” periods are of equal length. The motor speed adjustment allows the overall cycle to be varied from one revolution of the cam shaft in two seconds (30 flashes per minute) to one revolution in four seconds (15 flashes per minute).

SPECIFICATIONS
  • 115 volt motor, 50/60 cycle. Also available in 220 volts.

  • Flasher Size:  4.625″ x 4.375″ x 2.25″

  • Weight:  2.5 lbs.

  • # of Circuits:  1

  • Amps per Circuit:  15A

  • Flashing Action:  On – Off

  • Available Cam Cut:  50/50

  • Flashers per Circuit per Minute: 15 – 30

  • Total Watt Capacity at 115 Volts: 1725 Watts

MADE-IN-THE-USA-SAYING.jpg
$205 ea.
Call to Order!
Model:  30-01
SIGNATROL-FLASHER.jpg

   STOCKED!

SIGNATROL-30-02.jpg
SIGNATROL MODEL 30-02 "CHASER "

Signatrol Model 30-02 is a standard duty 2 circuit On-Off flasher units with variable speed controls.

 

This standard unit is furnished with 50% cams, (single notch) so the “ON” and “OFF” periods are of equal length.  The motor speed adjustment allows the overall cycle to be varied from one revolution of the cam shaft in two seconds (30 flashes per minute) to one revolution in four seconds (15 flashes per minute).

SPECIFICATIONS
  • 115 volt motor, 50/60 cycle. Also available in 220 volts.

  • Flasher Size:  4.625″ x 4.375″ x 2.25″

  • Weight:  2.5 lbs.

  • # of Circuits:  2

  • Amps per Circuit:  15A

  • Flashing Action:  On – Off

  • Available Cam Cut:  50/50

  • Flashers per Circuit per Minute:  15 – 30

  • Total Watt Capacity at 115 Volts:  3450 Watts

$231 ea.
Call to Order!
Model:  30-02
SIGNATROL-FLASHER.jpg

   STOCKED!

SIGNATROL-30-A2.jpg
SIGNATROL MODEL 30-A2 "CHASER "

Signatrol Model 30-A2 is a standard duty alternating 2 circuit On-Off flasher units with variable speed controls.

 

This standard unit is furnished with 50% cams, (single notch) so the “ON” and “OFF” periods are of equal length.  The motor speed adjustment allows the overall cycle to be varied from one revolution of the cam shaft in two seconds (30 flashes per minute) to one revolution in four seconds 

(15 flashes per minute).

SPECIFICATIONS
  • 115 volt motor, 50/60 cycle. Also available in 220 volts.

  • Flasher Size:  4.625″ x 4.375″ x 2.25″

  • Weight:  2.5 lbs.

  • # of Circuits:  2

  • Amps per Circuit:  15A

  • Flashing Action:  Alternating

  • Available Cam Cut:  50/50

  • Flashers per Circuit per Minute:  15 – 30

  • Total Watt Capacity at 115 Volts:  3450 Watts

$235 ea.
Call to Order!
Model:  30-A2
Signatrol-30-44.jpg
SIGNATROL-FLASHER.jpg
Model 30-44
DISCONTINUED
>>> Side-By-Side Look <<<
GREAT-LAKES-33-C4.jpg
FMS-FLASHER.jpg
Model 33-C4
REPLACEMENT
SIGNATROL MODEL 30-44 "CHASER "

Signatrol Model 30-44 has been replaced by the FMS Model 33-C4

 

The Signatrol 30-44 and the FMS 33-C4 both are 3/on - 1/off chasers rated at 10 AMP's per circuit. Both flashers operate the same way only using slightly different parts. When the FMS and Signatrol became one in the same Company, it was decided there wasn’t enough value in keeping both the 30-44 and 33-C4 around since they were so similar.  We can’t think of any reason where a customer replacing a 30-44 with a 33-C4 would have any issues. These two models are all but twins.

​

​

The Model 33 Chasers are most commonly used on flashing incandescent bulb signs where "dark spots" chase around a border or directional motion is incorporated into a field of bulbs. The Model 33 can be used to chase neon, though it must be incorporated on the primary side of any transformers. Model 33 Chasers are available from stock with three, four or five circuits. Larger chasers are available by special order.

 

The Model 33 chasers are ruggedly constructed to provide years of smooth, quiet, trouble free service. Each features molded terminal blocks, permanently lubricated bearings, and all corrosion resistant surfaces. Contacts are rated to handle 10 amps each and are accessible for easy replacement.

bottom of page